PRAGATI PROCESS CONTROLS
Dombivli, Thane, Maharashtra
GST No. 27AJJPP8099E1ZL
Call 0804605985077% Response Rate
Send E-mail
A primary injection test is helpful for substations or circuits with high voltage and current. It is just the flow of rated current in the circuit under test.
Owing to our expertise in this field, our firm is engaged in supplying an extensive array of Primary Injection Kit
| Minimum Order Quantity | 1 Number |
| Usage | Industrial, Laboratory |
| Display Type | Digital |
| Phase | Single Phase |
| Supply | AC |
| Frequency | 50Hz |
| Input | 230v |
| Model | PCI-2000 Portable Type |
| Brand | Pragati process Controls |
| Color | Orange |
| Control | With the help of Manual Auto Transformer (according to customer demand) |
| Current Source | 10 to 2000 Amp (according to customer demand). |
| Condition | New |
| Measuring | Isolated CT for current output, digital Voltmeter for voltage output |
| Output Power | 6.0V (according to customer demand). Up to 15kva |
| Protection | a) Overload b) Open circuit c) Over temp. |
| Timer Control Circuit Modes | 0.001 to 99999ms, Accuracy 0.1 Percent of reading Plus minus 1ms |
| Warranty | 1 Year against manufacturing defects & Extended optional. |
| Operation time | 1min ON, 5mins OFF. |
| Timer Stop Input | Voltage input (24 to 300 V, DC or peak AC), drycontact input, or removal of primary current |
| Input voltage | Single phase 230V AC, 50Hz Protected with MCB & HRC fuse , or as per customer demand |
| External Current Meter range | 100A to 2000 A, Accuracy 1Percent of reading, Plus minus20 mA |
| Current accuracy | Grater than 1.0 Percent (F. S). |
PRIMARY INJECTION Test Set-2000A-Portable
PCI-2000 Portable Primary Injection Test Set, is the ideal equipment for testing high-current device in the power and electric industry, used in power plants, power distribution stations, electrical manufacturing and research institutes. Our Primary Current Injection Test Sets are used for loading, calibration and testing of CT's bimetals relays etc.
Salient Features:
· All outputs continuously variable.
· Time base multi range DIGITAL TIMER
· True RMS digital metering of outputs
· Compact rugged design
· Auto-switch off in all modes of operation.
· All current outputs fully isolated and distortion free.
· Suitable for testing thermal devices
· All controls and metering centralized.
| Minimum Order Quantity | 1 Number |
| Model | PCI-500 to 800A |
| Usage/Application | Current Injection Source are specially designed for testing and calibration of CTS, relays, etc. |
| Color | As per company standard |
| Display Type | Digital |
| Brand | PRAGATI PROCESS CONTROLS |
| Usage | Laboratory, Industrial |
| Supply | AC |
| Frequency (MHz) | 50Hz |
| Phase | Single Phase |
| Accuracy (%) | Grater than 1.0Percent (F. S). |
| Control | With the help of Manual Auto Transformer (according to customer demand) |
| Current Source | 10 to 800 Amp (according to customer demand). |
| Measuring | Isolated CT for current output, digital Voltmeter for voltage output |
| Output Power | 6.0V (according to customer demand). Up to 15kva |
| I Deal In | New Only |
| Protection | a)Overload b)Open circuit c)Over temp. |
| Timer Control Circuit Modes | 0.001 to 99999ms, Accuracy 0.1 Percent of reading Plus minus1ms |
| Warranty | 1 Year against manufacturing defects & Extended optional. |
| Condition | New |
| External Current Meter range | 100A to 800 A, Accuracy 1 Percent of reading, Plus minus 20 mA |
| Timer Stop Input | Voltage input (24 to 300 V, DC or peak AC), drycontact input, or removal of primary current |
| Input voltage | Single phase 230V AC, 50Hz Protected with MCB & HRC fuse , or as per customer demand |
| Operation time | 1min ON, 5mins OFF. |
| Country of Origin | Made in India |
PRIMARY CURRENT INJECTION Trolley-500 to 800A
PCI-300 to 500 Manual Primary Injection Test Set, is the ideal equipment for testing high-current device in the power and electric industry, used in power plants, power distribution stations, electrical manufacturing and research institutes. Our Primary Current Injection Test Sets are used for loading, calibration and testing of CT's bimetals relays etc.
Salient Features:
| Minimum Order Quantity | 1 Number |
| Display Type | Digital |
| Brand | PRAGATI |
| Usage | Industrial, Laboratory |
| Input | 230v |
| Frequency | 50Hz |
| Supply | AC |
| Phase | Single Phase |
| Accuracy (%) | Grater than & equal to 1.0 Percent (F. S). |
| Input Voltage (V) | Single phase 230V AC, 50Hz Protected with MCB & HRC fuse , or as per customer demand |
| Control | With the help of Manual Auto Transformer (according to customer demand) |
| Measuring | Isolated CT for current output, digital Voltmeter for voltage output |
| Output Power | 6.0V (according to customer demand). Up to 15kva |
| Protection | a) Overload b) Open circuit c) Over temp. |
| Timer Control Circuit Modes | 0.001 to 99999ms, Accuracy 0.1Percent of reading plus minus 1ms |
| Warranty | 1 Year against manufacturing defects & Extended optional. |
| Operation time | 1min ON, 5mins OFF. |
| Timer Stop Input | Voltage input (24 to 300 V, DC or peak AC), drycontact input, or removal of primary current |
| External Current Meter range | 100A to 500 A Accuracy 1 Percent of reading Plus minus20 mA |
PRIMARY INJECTION Test Set-5000A-Portable
PCI-5000 Portable Primary Injection Test Set, is the ideal equipment for testing high-current device in the power and electric industry, used in power plants, power distribution stations, electrical manufacturing and research institutes. Our Primary Current Injection Test Sets are used for loading, calibration and testing of CT's bimetals relays etc.
Salient Features:
· All outputs continuously variable.
· Time base multi range DIGITAL TIMER
· True RMS digital metering of outputs
· Compact rugged design
· Auto-switch off in all modes of operation.
· All current outputs fully isolated and distortion free.
· Suitable for testing thermal devices
· All controls and metering centralized.
| Minimum Order Quantity | 1 Number |
| Display Type | Digital |
| Voltage (V) | 220 V |
| Frequency (MHz) | 50 HZ |
| Supply | AC |
| Brand | Pragati process |
| Driven Type | Electric |
| Minimum Order Quantity | 1 Set |
| Voltage | 0-300 AC,0-300DC,0-10A AC,0-1000A AC |
| Frequency | 50HZ |
| Weight | 250Kg |
| Model Name/Number | AC-DC-PRI-SEC |
| Power | 6KVA |
| Tolerance | 0.5 |
| Range | 0-300VAC |
| Brand | PRAGATI PROCESS CONTROLS |
| Country of Origin | Made in India |
| General Specification | |
| Make | Pragati |
| Supply Input | Three Phase 415V AC 50Hz (16 A at Full load) ±10% |
| Primary Current Injection | Setting / Opration-Variable with the help Knob |
| Working duration-2 minutes On, 5 Min OFF. | |
| Metering-3 ½ Digital Ammeter 0-10A | |
| Protection-Overload protection with indication of Ovrload trip | |
| Current Rating | 10-1000A |
| CT Test Current | 0-1A & 0-5A Continiously Variable (Three O/P Simultanaiously) |
| Pt Test Voltage | 0-220V AC Between R-N ,Continiously Variable |
| 0-220V AC Between Y-N ,Continiously Variable | |
| 0-220V AC Between B-N ,Continiously Variable | |
| Single phase O/P | Fix output protected with two pole MCB |
| Three Phase fix Output | Fix output through 16A 3P+N+E ind Socket protected with Four pole MCB |
| Fabrication | Robust enclosure M S Powder Coated & mounted on lockable swivelling PU 4 inch castors. |
| Minimum Order Quantity | 1 Number |
| Usage | Laboratory, Industrial |
| Display Type | Digital |
| Frequency (MHz) | 50/60 Hz |
| Capacity | 20 KVA |
| Supply | AC |
| Condition | New |
PRIMARY CURRENT INJECTION SOURCE
PCI-6000 Manual Primary Injection Test Set, is the ideal equipment for testing high-current device in the power and electric industry, used in power plants, power distribution stations, electrical manufacturing and research institutes. Our Primary Current Injection Test Sets are used for loading, calibration and testing of CT's bimetals relays etc.
Salient Features:
GENERAL SPECIFICATIONS | |
Input voltage: | Single phase 230V AC, 50Hz Protected with MCB & HRC fuse , or as per customer demand |
Current Source | 10 – 6000 Amp (according to customer demand). |
Output Power | 6.0V (according to customer demand). Up to 15kva |
Operation time: | 1min ON, 5mins OFF. |
Current accuracy | ≤ 1.0% (F. S). |
External Current Meter range | 100 mA – 6000 A, Accuracy: 1% of reading, ±20 mA |
Timer Control Circuit Modes | 0.001-99999ms, Accuracy: 0.1% of reading ±1ms |
Normally Closed: Used to test a device with normally closed contacts. The timer stops and the output is de-energized when the contacts open. | |
Timer Stop Input | Voltage input (24 – 300 V, DC or peak AC), dry-contact input, or removal of primary current |
Protection | a) Overload b) Open circuit c) Over temp. |
Measuring | Isolated CT for current output, digital Voltmeter for voltage output |
External Current Meter range | 100 mA – 6000 A, Accuracy: 1% of reading, ±20 mA |
Control | With the help of Manual Auto Transformer (according to customer demand) |
Weight. | About 400kg |
Warranty | 1 Year against manufacturing defects & Extended optional. |
| Display Type | Digital |
| Frequency (MHz) | 50/60 Hz |
| Input Voltage (V) | 230 V |
| Supply | AC |
| Usage | Industrial |
| Grade | Automatic |
| Condition | New |
PRIMARY CURRENT INJECTION SOURCE
PCI-2000 Manual Primary Injection Test Set, is the ideal equipment for testing high-current device in the power and electric industry, used in power plants, power distribution stations, electrical manufacturing and research institutes. Our Primary Current Injection Test Sets are used for loading, calibration and testing of CT's bimetals relays etc.
Silent Features:
GENERAL SPECIFICATIONS | |
Input voltage: | Single phase 230V AC, 50Hz Protected with MCB & HRC fuse , or as per customer demand |
Current Source | 10 – 2000 Amp (according to customer demand). |
Output Power | 6.0V (according to customer demand). Up to 15kva |
Operation time: | 1min ON, 5mins OFF. |
Current accuracy | ≤ 1.0% (F. S). |
External Current Meter range | 100 mA – 2000 A, Accuracy: 1% of reading, ±20 mA |
Timer Control Circuit Modes | 0.001-99999ms, Accuracy: 0.1% of reading ±1ms |
Normally Closed: Used to test a device with normally closed contacts. The timer stops and the output is de-energized when the contacts open. | |
Timer Stop Input | Voltage input (24 – 300 V, DC or peak AC), dry-contact input, or removal of primary current |
Protection | a) Overload b) Open circuit c) Over temp. |
Measuring | Isolated CT for current output, digital Voltmeter for voltage output |
External Current Meter range | 100 mA – 2000 A, Accuracy: 1% of reading, ±20 mA |
Control | With the help of Manual Auto Transformer (according to customer demand) |
Weight. | About 400kg |
Warranty | 1 Year against manufacturing defects & Extended optional. |
| Minimum Order Quantity | 1 Number |
| Display Type | Digital |
| Brand | PRAGATI PROCESS CONTROLS |
| Usage | Industrial, Laboratory |
| Protection | Overload and short circuit protection |
| Warranty | 1 Year against manufacturing defects & Extended optional. |
| Condition | New |
Primary Current with Temperature rise Test
PCI-2000 upto 5000 Manual Primary Injection Test Set, is the ideal equipment for testing high-current device in the power and electric industry, used in power plants, power distribution stations, electrical manufacturing and research institutes. Our Primary Current Injection Test Sets are used for loading, calibration and testing of CT's bimetals relays etc.
Salient Features:
· All outputs continuously variable.
· Time base multi range DIGITAL TIMER
· True RMS digital metering of outputs
· Compact rugged design
· Auto-switch off in all modes of operation.
· All current outputs fully isolated and distortion free.
· Suitable for testing thermal devices
· All controls and metering centralized.
|
GENERAL SPECIFICATIONS |
|
|
Input voltage: |
Single phase 230V AC, 50Hz Protected with MCB & HRC fuse , or as per customer demand |
|
Current Source |
1 – 5000 Amp (according to customer demand). |
|
Output Power |
6.0V (according to customer demand). Up to 15kva |
|
Operation time: |
1min ON, 5mins OFF. |
|
Current accuracy |
≤ 1.0% (F. S). |
|
External Current Meter range |
Up to 2000A For Continuous Above 2000A up to 5000A For 1min |
|
Timer Control Circuit Modes |
0.001-99999ms, Accuracy: 0.1% of reading ±1ms |
|
Normally Closed: Used to test a device with normally closed contacts. The timer stops and the output is de-energized when the contacts open. |
|
|
Timer Stop Input |
Voltage input (24 – 300 V, DC or peak AC), dry-contact input, or removal of primary current |
|
Protection |
a) Overload b) Open circuit c) Over temp. |
|
Measuring |
Isolated CT for current output, digital Voltmeter for voltage output |
|
Control |
With the help of Manual Auto Transformer (according to customer demand) |
|
Weight. |
About 400kg |
|
Warranty |
1 Year against manufacturing defects & Extended optional. |
| Minimum Order Quantity | 1 Number |
| Lighting Type | LED |
| Type of Lighting Application | Outdoor Lighting |
| Color | Orange |
| Brand | Pragati Process Controls |
| Protection | a) Overload b) Open circuit c) Over temp. |
| Warranty | 1 Year against manufacturing defects & Extended optional. |
| Input voltage | Single phase 230V AC, 50Hz Protected with MCB & HRC fuse , or as per customer demand |
| Timer Control Circuit Modes | 0.001 to 99999ms Accuracy 0.1 percent of reading Plus Minus1ms |
| Measuring | Isolated CT for current output, digital Voltmeter for voltage output |
| Output Power | 6.0V (according to customer demand). Up to 15kva |
| External Current Meter range | 100A to 500 A Accuracy1 Percent of reading Plus minus20 mA |
| Timer Stop Input | Voltage input (24 to 300 V, DC or peak AC), drycontact input, or removal of primary current |
| Power Source | Electrical |
| Current accuracy | Grater than1.0 Percent (F. S). |
| Operation time | 1min ON, 5mins OFF. |
| Current Source | 10 to1000 Amp (according to customer demand). |
| Control | With the help of Manual Auto Transformer (according to customer demand) |
PRIMARY CURRENT INJECTION SOURCE
PCI-1000 Manual Primary Injection Test Set, is the ideal equipment for testing high-current device in the power and electric industry, used in power plants, power distribution stations, electrical manufacturing and research institutes. Our Primary Current Injection Test Sets are used for loading, calibration and testing of CT's bimetals relays etc.
Salient Features:
| Minimum Order Quantity | 1 Number |
| Output Type | Multiple |
| Lighting Type | LED |
| Output Current | 20A, 30A |
| Phase | 3 Phase |
| Power Source | Electrical |
CURRENT INJECTION SOURCE Set-3000A
PCI-3000 Manual Primary Injection Test Set, is the ideal equipment for testing high-current device in the power and electric industry, used in power plants, power distribution stations, electrical manufacturing and research institutes. Our Primary Current Injection Test Sets are used for loading, calibration and testing of CT's bimetals relays etc.
Salient Features:
· All outputs continuously variable.
· Time base multi range DIGITAL TIMER
· True RMS digital metering of outputs
· Compact rugged design
· Auto-switch off in all modes of operation.
· All current outputs fully isolated and distortion free.
· Suitable for testing thermal devices
· All controls and metering centralized.
GENERAL SPECIFICATIONS | |
Input voltage: | Single phase 230V AC, 50Hz Protected with MCB & HRC fuse , or as per customer demand |
Current Source | 10 – 3000 Amp (according to customer demand). |
Output Power | 6.0V (according to customer demand). Up to 15kva |
Operation time: | 1min ON, 5mins OFF. |
Current accuracy | ≤ 1.0% (F. S). |
External Current Meter range | 100 mA – 3000 A, Accuracy: 1% of reading, ±20 mA |
Timer Control Circuit Modes | 0.001-99999ms, Accuracy: 0.1% of reading ±1ms |
Normally Closed: Used to test a device with normally closed contacts. The timer stops and the output is de-energized when the contacts open. | |
Timer Stop Input | Voltage input (24 – 300 V, DC or peak AC), dry-contact input, or removal of primary current |
Protection | a) Overload b) Open circuit c) Over temp. |
Measuring | Isolated CT for current output, digital Voltmeter for voltage output |
External Current Meter range | 100 mA – 3000 A, Accuracy: 1% of reading, ±20 mA |
Control | With the help of Manual Auto Transformer (according to customer demand) |
Weight. | About 400kg |
Warranty | 1 Year against manufacturing defects & Extended optional. |
| Minimum Order Quantity | 1 Number |
| Brand | PRAGATI PROCESS CONTROLS |
| Usage/Application | Able to test most of Relays |
| Color | Black |
| Packaging Type | Wooden Box |
| Display Type | Digital |
| Usage | Industrial |
| Grade | Manual |
| Weight | About 37 kgs |
| I Deal In | New Only |
| Country of Origin | Made in India |
Product Details:
| Usage | Industrial |
| Power Source | Electrical |
| Condition | New |
| Display Type | Digital |
| Frequency (MHz) | 50 Hz |
| Phase | Single Phase |
| Supply | AC |
PRIMARY CURRENT INJECTION SOURCE
Portable Primary Injection Test Set, is the ideal equipment for testing high-current device in the power and electric industry, used in power plants, power distribution stations, electrical manufacturing and research institutes. Our Primary Current Injection Test Sets are used for loading, calibration and testing of CT's bimetals relays etc.
Salient Features:
|
GENERAL SPECIFICATIONS |
|
|
Input voltage: |
Single phase 230V AC, 50Hz Protected with MCB & HRC fuse , or as per customer demand |
|
Current Source |
10Milli Amp – 700 Amp (according to customer demand). |
|
Output Power |
Up to 3KV |
|
Operation time: |
1min ON, 5mins OFF. |
|
Current accuracy |
≤ 1.0% (F. S). |
|
|
|
|
Timer Control Circuit Modes |
0.001-99999ms, Accuracy: 0.1% of reading ±1ms |
|
Normally Closed: Used to test a device with normally closed contacts. |
|
|
Timer Stop Input |
Voltage input (24 – 300 V, DC or peak AC), dry-contact input, or removal of primary current |
|
Protection |
a) Overload b) Open circuit c) Over temp. |
|
Measuring |
Isolated CT for current output, digital Voltmeter for voltage output |
|
External Current Meter range |
100 mA – 700 A, Accuracy: 1% of reading, ±20 mA |
|
Control |
With the help of Manual Auto Transformer (according to customer demand) |
|
Weight. |
About 37kg |
|
Warranty |
1 Year against manufacturing defects & Extended optional. |
| Minimum Order Quantity | 1 Number |
| Display Type | Digital |
| Frequency (MHz) | 50 Hz |
| Phase | 3 Phase |
| Supply | AC |
| Usage | Industrial |
| Condition | New |
| Power Source | Electrical |
PRIMARY CURRENT INJECTION SOURCE
PCI-1250 Manual Primary Injection Test Set, is the ideal equipment for testing high-current device in the power and electric industry, used in power plants, power distribution stations, electrical manufacturing and research institutes. Our Primary Current Injection Test Sets are used for loading, calibration and testing of CT's bimetals relays etc.
Salient Features:
GENERAL SPECIFICATIONS | |
Input voltage: | Single phase 230V AC, 50Hz Protected with MCB & HRC fuse , or as per customer demand |
Current Source | 10 – 1250 Amp (according to customer demand). |
Output Power | 6.0V (according to customer demand). Up to 15kva |
Operation time: | 1min ON, 5mins OFF. |
Current accuracy | ≤ 1.0% (F. S). |
|
|
Timer Control Circuit Modes | 0.001-99999ms, Accuracy: 0.1% of reading ±1ms |
Normally Closed: Used to test a device with normally closed contacts. The timer stops and the output is de-energized when the contacts open. | |
Timer Stop Input | Voltage input (24 – 300 V, DC or peak AC), dry-contact input, or removal of primary current |
Protection | a) Overload b) Open circuit c) Over temp. |
Measuring | Isolated CT for current output, digital Voltmeter for voltage output |
External Current Meter range | 100 mA – 1250 A, Accuracy: 1% of reading, ±20 mA |
Control | With the help of Manual Auto Transformer (according to customer demand) |
Weight. | About 100kg |
Warranty | 1 Year against manufacturing defects & Extended optional. |
| Minimum Order Quantity | 1 PIECE |
| Current Source | 10 to 500 Amp (according to customer demand). |
| Output Power | 6.0V (according to customer demand). Up to 15kva |
| Operation time | 1min ON, 5mins OFF. |
| Input voltage | Single phase 230V AC, 50Hz Protected with MCB & HRC fuse , or as per customer demand |
PRIMARY CURRENT INJECTION SOURCE
PCI-300 to 500 Manual Primary Injection Test Set, is the ideal equipment for testing high-current device in the power and electric industry, used in power plants, power distribution stations, electrical manufacturing and research institutes. Our Primary Current Injection Test Sets are used for loading, calibration and testing of CT's bimetals relays etc.
Salient Features: