Minimum Order Quantity | 1 Piece |
Usage/Application | Industrial |
Brand | Pragati Process Controls |
Body Material | Best |
Phase | Single Phase / Three Phase |
Country of Origin | Made in India |
Thyristor Power Control Card
SCR power controller for electrical heating loads ranging from 3 KW/Single phase to 300KW/3-phase. This power pack module comprises of suitable triggering card model LTC-12 or LTC-13 or LTC-15, suitably rated back to back connected SCR module (with electrically isolated base)- mounted on the appropriately rated heat sink (natural air or forced air cool), input and output clip-on type heavy duty connectors or copper bus bars, semiconductor fuses and thermal cutouts. The entire assembly is mounted on MS powder coated plate, which in turn can be easily mounted inside the closed control panel as desired. Complete ready to use control panel with suitable PID / Program temperature controller can also be supplied as per the user’s specifications and requirement.
Features:
· 15 Amps to 350 Amps capacity (1 Kw to 180 Kw)
· Auto/ Manual operation
· Soft Start for smooth control.
· Adjustable power and current limit.
· Isolated heat sink for safety.
· Simple and Modular design for easy servicing of cards and thyristor
GENERAL SPECIFICATIONS |
|
Supply Voltage |
120/240/380/415VAC,50/60Hz (User should specify) |
Load type |
Suitable for both resistive and inductive/transformer load(15A to 500A at 110/230/415 VAC) |
Available rating |
3KW Single phase to 300KW Three phase |
Available configuration |
Single phase two phase three phase (3 or 4 wire star and 6 wire delta) |
Control action |
Phase angle control (self synchronized) |
Control signal |
(4-20)mA / (0-50)VDC/ (0-10)VDC/Potentiometer |
Output |
0 to 230VAC or 0 to 415VAC variable voltage proportional to the control signal. |
Smooth control |
Adjustable ramp up and ramp down time for soft increase and decrease of output voltage |
Current control |
Using Current Limit and Trip settings on card. (LTC-13) |
Setting |
For adjusting voltage and current per phase using on card present |
Load type |
Suitable for both resistive and inductive/transformer load(15A to 500A at 110/230/415 VAC) |
Mounting |
Power pack can be mounted on the base plate of the control panel |