Temperature Rise Test Panel

Product Details:

Heat Run Test system

Temperature rise tests are used to make sure that a product does not get overheated during operation. Temperature rise tests can be performed on bushings, instrument transformers, disconnections and other equipment

Salient Features:
1.This product is composed of large current generator, voltage regulator, temperature tester, industrial controlling computer operation system.
2. Voltage and current displayed or Digital meter controlling, precision level is 0.5.
3. With zero position starting up protection function and emergency stop function.
4. Software test time self-setting and with prompting function.
5. After current setting, any deviation, PLC can automatically adjust according to the parameters set in advance.
6. Prevent strong magnetic interference.
7. Use imported K type thermocouple: 0~1370ºC.
8.Temperature tester with multi-channel temperature monitoring, measuring, recording function, and comparing with the test point temperature form rising temperature, self-alarm when the rising temperature higher than setting temperature. Any point temperatures and temperature rising value can be checked, measurement error is ±1%.

Product Details:

Additional Information:

• Delivery Time: 4-5 WEEKS

Product Details:

TEMPERATURE RISE TEST FOR BUSHING

Temperature rise tests are used to make sure that a product does not get overheated during operation. Temperature rise tests can be performed on bushings, instrument transformers, disconnections and other equipment

Salient Features:
1.This product is composed of large current generator, voltage regulator, temperature tester, industrial controlling computer operation system.
2. Voltage and current displayed or Digital meter controlling, precision level is 0.5.
3. With zero position starting up protection function and emergency stop function.
4. Software test time self-setting and with prompting function.
5. After current setting, any deviation, PLC can automatically adjust according to the parameters set in advance.
6. Prevent strong magnetic interference.
7. Use imported K type thermocouple: 0~1370ºC.
8.Temperature tester with multi-channel temperature monitoring, measuring, recording function, and comparing with the test point temperature form rising temperature, self-alarm when the rising temperature higher than setting temperature. Any point temperatures and temperature rising value can be checked, measurement error is ±1%.

Product Details:

TEMPERATURE RISE TEST SETUP

Temperature rise test device is used for manufacturers testing the high and low voltage electrical products before delivery. It provides two functions of large current and temperature test. Convenient for user operation, improves working efficiency. It applies to power plant, power distribution station, electrical appliance manufacturing factories, scientific researching institutes, and laboratory. Multi-channel temperature recorder uses digital synchronous sampling technology, with advantages of rapid test speed, high precision, convenient to operate, good appearance.

Salient Features:
1.This product is composed of large current generator, voltage regulator, temperature tester, industrial controlling computer operation system.
2. Voltage and current displayed or Digital meter controlling, precision level is 0.5.
3. With zero position starting up protection function and emergency stop function.
4. Software test time self-setting and with prompting function.
5. After current setting, any deviation, PLC can automatically adjust according to the parameters set in advance.
6. Prevent strong magnetic interference.
7. Use imported K type thermocouple: 0~1370ºC.
8.Temperature tester with multi-channel temperature monitoring, measuring, recording function, and comparing with the test point temperature form rising temperature, self-alarm when the rising temperature higher than setting temperature. Any point temperatures and temperature rising value can be checked, measurement error is ±1%.

Product Details:

Temperature Rise Test Panel For Switches

A Temperature rise test bench to test plugs and socket-outlets for household and similar purposes that completely integrates a programmable AC current source of low voltage along with a temperature measurement, display and data logging module along with PC interface. The system also integrates a micro controller based timer to enable the user to digitally set programmed ON time.Thus; the product is a perfect integration as per IEC standards at an optimized cost.

Salient Features:

• · Servo controlled regulation against line voltage fluctuations
• · Micro controller based Preset timer to enable the user to digitally set On-time.
• · Digital display of voltage, current, temperature and time
• · Manual / Auto to test the system in any test mode
• · Apply to: heat cycling temperature rises test

Product Details:

TEMPERATURE RISE TEST PANEL UPTO-1500

Temperature rise tests are used to make sure that a product does not get overheated during operation. Temperature rise tests can be performed on bushings, instrument transformers, disconnections and other equipment

Salient Features:
1.This product is composed of large current generator, voltage regulator, temperature tester, industrial controlling computer operation system.
2. Voltage and current displayed or Digital meter controlling, precision level is 0.5.
3. With zero position starting up protection function and emergency stop function.
4. Software test time self-setting and with prompting function.
5. After current setting, any deviation, PLC can automatically adjust according to the parameters set in advance.
6. Prevent strong magnetic interference.
7. Use imported K type thermocouple: 0~1370ºC.
8.Temperature tester with multi-channel temperature monitoring, measuring, recording function, and comparing with the test point temperature form rising temperature, self-alarm when the rising temperature higher than setting temperature. Any point temperatures and temperature rising value can be checked, measurement error is ±1%.

Product Details:

TEMPERATURE RISE TEST PANEL UPTO-500

Temperature rise tests are used to make sure that a product does not get overheated during operation. Temperature rise tests can be performed on bushings, instrument transformers, disconnections and other equipment

Salient Features:
1.This product is composed of large current generator, voltage regulator, temperature tester, industrial controlling computer operation system.
2. Voltage and current displayed or Digital meter controlling, precision level is 0.5.
3. With zero position starting up protection function and emergency stop function.
4. Software test time self-setting and with prompting function.
5. After current setting, if there is any deviation, PLC can automatically adjust according to the parameters set in advance.
6. Prevents strong magnetic interference.
7. Use of imported K type thermocouple: 0~1370ºC.
8.Temperature tester with multi-channel temperature monitoring, measuring, recording function, and comparing with the test point temperature form rising temperature, self-alarm when the rising temperature is higher than setting temperature. At any point temperatures and temperature rising values can be checked, measurement error is ±1%.